Harmony Spa Capsule

Harmony Spa Capsule
Hover over image to zoom
Price: Call for price
Product ID : NQ-Harmony Spa Capsule
E-mail to a friend

Purchase

Call for price

Description

The Harmony Standard is suitable for professional institutions like wellness centers. beauty parlors, solariums, fitness studios, spa hotels, day spas, sports and recreation clubs and health clubs.

Features:

  • Infrared sauna
  • Steam sauna
  • Aroma
  • Vichy shower
  • Vibromassage
  • Chromotheraphy lights
  • Hydromassage
  • Air bubble massage
  • Music system (MP3)
  • Double electronic control panel for assistant (optional)
  • Face fan
  • Hand shower
Specifications:
Water Electricity Measures
water capacity           42G voltate                 230V length                87.50"
drain connection        50 mm amperage              20A width                 47.75"
water inlet                G 1/2 frequency       50/60 Hz height                   52"
required pressure      2-4 bar power               4.5 kW weight              384 lbs.

Preconditions for installation

Room

Equipment is designed for use in indoor conditions. The temperature of the room where the equipment is used should be between 5°C-40°C and the relative humidity of the room should not exceed 85%. As in the working regime the machine creates humidity, be sure that the construction of the room is moisture proof and the room has ventilation. It is recommended to have a general trap on the floor. It is important that after installation there will be adequate room for the cover of the equipment to be easily opened as there must be sufficient room during the service maintenance.

Power

The electrical installation of the Harmony equipment should be carried out by qualified specialists. Power cord should be protected with the protective switch which is in accordance with requirements (CEI 64-8). Power cord material should be at least 3x2,5 mm² copper crosscut wire. The Power cord should be connected without intermediate connections to the moisture proof junction box on the wall close to the equipment. Maximum combined power consumption for the equipment is 4,5 kW. The protective device current in front of equipment feeder is 20 A.

Water

Clean water is important for the normal functioning of the equipment. If the rust and mineral matter consistency in the water is too high, then it is advisable to install water filters. The recommended water pressure is 2-4 Bars. 2 water pressure hoses are required, one for hot another for cold water.Water drainage hose should be of 50 mm. The length of drainage hose depends on the distance from drainage opening on the ground.

Contact one of our Salon Design Specialist Today to add the Harmony Standard to your Salon Equipment.

Call 800-762-1017

Product Reviews

Login or Register to write the first review.

Products You May Like

Categories

The most complete source for salon equipment, day spa equipment, and salon furniture on the internet.