Harmony Mediq Spa Capsule

Harmony Mediq Spa Capsule
Hover over image to zoom
Price: Call for price
Product ID : NQ-Harmony-Mediq Spa Capsule
E-mail to a friend


Call for price


The Harmony Mediq is still an all-around cocoon suitable for wellness centers, spa hotels.





water capacity       50 G voltate              230V length            91.75"
drain connection    75 mm amperage          20A width             43.75"
water inlet             G 3/4 frequency     50/60 Hz height            54.75"
required pressure  2-4 bar power            4.5 kW weight       392.5 lbs.



  • Infrared sauna (double infrared lamp)
  • Steam sauna
  • Aroma system
  • Vichy shower
  • Vibromassage
  • Chromotheraphy lights
  • Hydromassage
  • Air bubble massage
  • Hand-held jet
  • Music system (MP3)
  • Face fan
  • Disinfection system
  • Water heater
  • Hand shower
  • Hood (fully accessible from both sides)
  • Longer bathtub
  • Faster water inlet and drainage
  • Vichy shower from tub and water system


Preconditions for installation


Equipment is designed for use in indoor conditions. The temperature of the room where the equipment is used should be between 5°C-40°C and the relative humidity of the room should not exceed 85%. As in the working regime the machine creates humidity, be sure that the construction of the room is moisture proof and the room has ventilation. It is recommended to have a general trap on the floor. It is important that after installation there will be adequate room for the cover of the equipment to be easily opened as there must be sufficient room during the service maintenance.


The electrical installation of the Harmony equipment should be carried out by qualified specialists. Power cord should be protected with the protective switch which is in accordance with requirements (CEI 64-8). Power cord material should be at least 3x2,5 mm² copper crosscut wire. The Power cord should be connected without intermediate connections to the moisture proof junction box on the wall close to the equipment. Maximum combined power consumption for the equipment is 3-4,5 kW depending on the unit. The protective device current in front of equipment feeder is 16- 20 A.


Clean water is important for the normal functioning of the equipment. If the rust and mineral matter consistency in the water is too high, then it is advisable to install water filters. The recommended water pressure is 2-4 Bars. 2 water pressure hoses are required, one for hot another for cold water. The length of drainage hose depends on the distance from drainage opening on the ground.

Contact one of our Salon Design Specialist Today to add The Harmony Mediq to your Salon Equipment.

Call 800-762-1017



Product Reviews

Login or Register to write the first review.

Products You May Like


The most complete source for salon equipment, day spa equipment, and salon furniture on the internet.